The Lift & Seal drum dumper is designed to discharge and meter powders into the inlet of a conveying system or existing process. The exclusive system hydraulically seals drums to a carbon steel pour cone for dust tight and contaminant free discharge.
The Aquamat condensate management system uses a four stage separation process to automatically and reliably separate oil from condensate. It is designed to virtually eliminate the need for expensive disposal by outside contractors. Units do not require electricity and are low maintenance.
Low permeation PFA tubing is useful in any industry where permeation is a problem that affects the purity of process chemicals.
The AEGIS iPRO shaft grounding ring safely channels harmful shaft currents away from bearings to ground. Specially designed for high current applications, it is ideal for protecting generators, turbines, and medium-voltage motors against electrical bearing damage.
PMMI, the trade association for packaging and converting machinery, has announced its educational program for this year's Pack Expo at the Las Vegas Convention Center Oct. 15-17.
Leading experts in the field will be presenters at a seminar devoted to key aspects of pneumatic conveying Sept. 18-20 at the CycloTech System Proving Facility in York, NE.
Environmental stewardship is a hot topic for numerous industries including the chemical, mineral, and petrochemical communities. The effects of this movement on the specialty materials application market is one of many issues that will be addressed at the Corrosion Solutions Conference Sept.
Spirapro TFC SR3 and TFC reverse osmosis (RO) spiral elements can be used for pharmaceutical and fine chemical applications.
Custom engineered wet-mix process systems that feature colloid mills and positive displacement feed pumps are packaged to achieve specific requirements for emulsifying, dispersion, and particle size reduction.
When Spectrum Chemicals & Laboratory Products, a division of Spectrum Chemical Mfg. Corp., decided to switch from amber glass bottles to plastic bottles, it needed a high-quality plastic that would be compatible with most of its products.
Speedi-Sleeves offer a sealing solution when machine shaft surfaces have been damaged or worn in operation. Made from stainless steel for corrosion resistance, these wear sleeves eliminate the typical need to replace or rework shafts whose surfaces have been compromised by abrasion due to environmental contaminants, high pressures, speeds, or inadequate lubrication.
Procap Series capacitance probes boast calibration stability, static discharge survival, and RF immunity. They use a simple timing technique that compares the discharge time of the probe capacitance to that of a reference capacitance.
Trace Source 57FPK gas-fed permeation tubes are designed to produce stable ppb calibration standards of arsine and other hydride impurities in polymerization grade ethylene and propylene. The tubes are used with a gas standards generating instrument that maintains the tube at constant temperature and flushes the tube with a constant flow of clean olefin matrix gas.
Drying to moistures of 0.5 to 0.1 percent or lower requires uniform heating and residence time. The K-S paddle dryer has been designed to reach these objectives with a continuous process. The mixing action of the paddle dryer's dual intermeshing agitators with heated wedge-shaped paddles provides for uniform heat transfer to the product and high heat transfer rates.