Advertisement
Product Releases
Subscribe to Chem.info Product Releases

Centrifugal Screener

April 1, 2008 6:37 am | Comments

The Centri-Sifter model MO medium-capacity centrifugal screener features a cantilevered shaft with two externally mounted bearings between the screening chamber and motor drive, allowing all internals to slide freely from

Dryer for Fine Powder

April 1, 2008 6:37 am | Comments

Booth 1000 A recent increase in capacity required an additional L-size Turbo-Dryer to heat-treat a fine (70 micron) metal oxide powder. This design can operate at temperatures up to 650°C to calcine or sinter metal powders.

Custom Shaft Seals (3396)

April 1, 2008 6:37 am | Comments

Booth 2531 These custom-engineered shaft seals for rotating dry bulk process equipment provide an alternative to packed gland-type seals in clean-in-place systems. The shaft speed envelope now extends to 1,000 surface-feet-per minute on dry-running shafts.

Advertisement

Heavy-Duty Drawer-In-Housing Unit

April 1, 2008 6:37 am | Comments

Booth 5316 The Ox heavy-duty drawer-in-housing unit incorporates design elements that are essential for optimum magnetic separation performance in challenging processing conditions.

Gravimetric Extrusion Control Software

April 1, 2008 6:37 am | Comments

Booth 1328 This continuous gravimetric extrusion control software package offers the ability to control the extruder speed so that its output has a predictable and repeatable mass flow.

TOPICS:

Integral Bulk Bag Conditioner

April 1, 2008 6:37 am | Comments

Booth 1005 This bulk bag conditioner-unloader system loosens bulk solid material that has solidified during storage and shipment, allowing the material to discharge through a bag spout.

Explosion Suppressor with Non-Explosive Actuator

April 1, 2008 6:37 am | Comments

Booth 2231 The PistonFire explosion suppressor is a dry chemical suppressor that is designed to meet the new stringent requirements of NFPA 69 (Standard on Explosion Prevention Systems).

Unit Train Batch Loading System

April 1, 2008 6:37 am | Comments

Booth 2143 Developed in collaboration with FGR Automation & Controls, this fully automated train batch weighing and loading system has been successfully implemented on a variety of materials including coal and coke.

TOPICS:
Advertisement

Ergonomic Screener

April 1, 2008 6:37 am | Comments

Booth 1937 The APEX Screener features an ergonomic design and increases uptime by allowing quick screen changes, while retaining the same process efficiency and gyratory-reciprocating motion of the Rotex Screener.

Process Plunger Pumps

March 13, 2008 12:28 pm | Comments

These direct drive, vertically mounted process plunger pumps are designed for continuous operation. The wetted components are manufactured from rust- and acid-resistant materials. Because the pump is mounted vertically, the cross head and plunger weights are neutralized within the sealing system

Side-Exit Accelerometer with Integral Cable

March 13, 2008 12:28 pm | Comments

The 787F side-exit, low-profile accelerometer is the integral cable version of the 787A side-exit general-purpose sensor — with a permanent Viton boot and Teflon-jacketed cable to provide protection in harsh environments

Oil Sight Glasses and Monitors

March 13, 2008 12:28 pm | Comments

An oil sight glass can be installed on pumps, gearboxes, bearing housings, and other lubrication-critical pieces of equipment to make possible the constant monitoring of bearing oil and the observation of contamination with dirt, grit, and water

Motor and Pump Mounting Block Kits

March 13, 2008 12:21 pm | Comments

PoxyBlock motor and pump mounting block kits are engineered to outperform steel blocks on any baseplate. Designed to be an economical alternative, they promise unmatched parallel tolerance and surface flatness as well as the excellent corrosion resistance of Zanite

Ball Bearings for Centrifugal Pump Applications

March 13, 2008 12:21 pm | Comments

These single-row angular contact ball bearings feature high radial and axial load capacity, high speed capabilities, and a steep contact angle of 40 degrees to meet the requirements of centrifugal pumps. The bearings are engineered for universal mounting in multiple arrangements including face-to-face, back-to-back, and tandem

Vibration Analyzer for Hazardous Areas

March 13, 2008 12:21 pm | Comments

The VibXpert two-channel FFT data collector and signal analyzer monitors and diagnoses machine conditions in the chemical industry, refineries, the oil and gas industry, and any other potentially explosive environment that requires intrinsically safe measuring systems

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading