The Model HSI3002 thermal imaging camera measures from 392° to 1,652°F (200° to 900°C) in petrochemical, glass, cement, metal, and refractory industries.
The 566 and 568 thermometers combine contact and non-contact temperature measurement capability in one tool.
The Solo-VPE variable pathlength extension enables UV/Vis measurements of varying solution concentrations without the need for dilutions.
The G450 Series compact, lightweight 4-gas detector continuously measures CO, H 2 S, O 2 and combustibles in ambient air.
Jacoby-Tarbox Phaeton XTL tank lights provide light for viewing into any process vessel or storage tank.
The V-Cone flowmeter is suitable for high-temperature, high-pressure liquid, natural gas, or steam service in extreme process environments including extracting oil from tar sands, which include a combination of crude bitumen, silica sand, and clay minerals.
The Com-paK Plus line of tri-lobe blowers has been expanded with the CB 110 and CB 130C units, which deliver up to 434 cfm at pressures to 15 psig and vacuum to 15 in. Hg.
Thurmalox 218 Primer/219 Topcoat protective coatings are VOC-compliant solutions formulated for the protection of metal surfaces under insulation exposed to temperatures from ambient to 450°F and other applications involving continuous and rapid wet-dry-wet thermal cycling.
These dry-pressed alumina ceramic balls, which are suitable for extremely harsh environments, can be used in mechanical devices that provide rotary or linear motion such as check and ball valves and bearings.
The BIM-UNT universal magnetic field sensor detects piston position on standard pneumatic cylinders.
Kalcret cement-bonded hard compound provides wear protection for system components and pipes. It boasts a reduced mixing time of approximately five minutes, easier handling, and a faster installation time; it can also be easily applied overhead.
Midland Manufacturing has recently upgraded its A-713-ML Angle Valves for use in chlorine railcar and tanker truck transportation applications.
The 10 Plus emergency shut-off valve, based on the 10 Series emergency shut-off valve, includes all the same features as the 10 Series with the addition of patent-pending SmartGuard technology, designed to contain fuel leakage at the shear groove and activate the valve to close in the event of a low-impact incident.
The Type 369 wafer check valve is available in sizes as large as 12 in. This feature, combined with its simple installation ability, spring option for horizontal mounting, and flow characteristics, make it useful in a variety of applications.