Product Releases
Subscribe to Product Releases
View Sample

Chem.Insider Daily

Multi-Gas Detector

January 28, 2008 12:40 pm | Comments

The G450 Series compact, lightweight 4-gas detector continuously measures CO, H 2 S, O 2 and combustibles in ambient air.

Tank Illuminators

January 28, 2008 12:29 pm | Comments

Jacoby-Tarbox Phaeton XTL tank lights provide light for viewing into any process vessel or storage tank.

Flowmeter for High Temperature and Pressures

January 28, 2008 12:29 pm | Comments

The V-Cone flowmeter is suitable for high-temperature, high-pressure liquid, natural gas, or steam service in extreme process environments including extracting oil from tar sands, which include a combination of crude bitumen, silica sand, and clay minerals.


Smaller and Quieter Compressors

January 28, 2008 12:29 pm | Comments

The Com-paK Plus line of tri-lobe blowers has been expanded with the CB 110 and CB 130C units, which deliver up to 434 cfm at pressures to 15 psig and vacuum to 15 in. Hg.

High-Temperature Coatings

January 28, 2008 12:29 pm | Comments

Thurmalox 218 Primer/219 Topcoat protective coatings are VOC-compliant solutions formulated for the protection of metal surfaces under insulation exposed to temperatures from ambient to 450°F and other applications involving continuous and rapid wet-dry-wet thermal cycling.

Alumina Ceramic Balls for Harsh Environments

January 28, 2008 12:29 pm | Comments

These dry-pressed alumina ceramic balls, which are suitable for extremely harsh environments, can be used in mechanical devices that provide rotary or linear motion such as check and ball valves and bearings.

Cylinder Position Sensors

January 28, 2008 12:29 pm | Comments

The BIM-UNT universal magnetic field sensor detects piston position on standard pneumatic cylinders.

Hard Compound for Wear Protection

January 28, 2008 12:29 pm | Comments

Kalcret cement-bonded hard compound provides wear protection for system components and pipes. It boasts a reduced mixing time of approximately five minutes, easier handling, and a faster installation time; it can also be easily applied overhead.


Angle Valves for Chlorine Transport Applications

January 28, 2008 12:25 pm | Comments

Midland Manufacturing has recently upgraded its A-713-ML Angle Valves for use in chlorine railcar and tanker truck transportation applications.

Emergency Shut-Off Valve

January 28, 2008 12:25 pm | Comments

The 10 Plus emergency shut-off valve, based on the 10 Series emergency shut-off valve, includes all the same features as the 10 Series with the addition of patent-pending SmartGuard technology, designed to contain fuel leakage at the shear groove and activate the valve to close in the event of a low-impact incident.

Wafer Check Valve

January 28, 2008 12:25 pm | Comments

The Type 369 wafer check valve is available in sizes as large as 12 in. This feature, combined with its simple installation ability, spring option for horizontal mounting, and flow characteristics, make it useful in a variety of applications.

Diaphragm Valves (3196)

January 28, 2008 12:25 pm | Comments

Dia-Flo diaphragm valves feature bubble tight shut-off, isolated bonnets, adjustable travel stops and a long list of unique features designed specifically to optimize valve performance and life.

Rolling Bearings with Integral Seals

January 28, 2008 12:23 pm | Comments

These rolling bearings with integral seals protect against contaminants and retain lubricant.

Split Shaft Seals for Dry Blenders

January 28, 2008 12:23 pm | Comments

MECO custom-engineered shaft seals are available fully split to retrofit blenders, mixers, and other rotating bulk process equipment without the removal of bearings or drives.

Top-Entering Agitators

January 28, 2008 12:19 pm | Comments

Model 20 HT/GT top-entering agitators are designed for a wide range of service in the chemical, pharmaceutical, ethanol and biofuels, water and wastewater, FGD, power, and other general process industries.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.