Effective for industrial air movement and fume extraction, Flex-Vest insulated hose operates over a wide temperature range to keep extreme temperatures inside, whether hot or cold, for a variety of applications. The hose features 1-in.
Superthane polyurethane tubing, which combines the properties of plastic and rubber, withstands wear, abrasion, weathering, chemicals, fuels, and moisture while remaining flexible. It can be used for a wide variety of gas and fluid transfer uses.
Two new diameters have been added to the SmartPipe compressed air distribution system. Made from smooth, calibrated aluminum with a low friction coefficient, the pipe is now available in 76 and 100 mm diameters.
The Kalflex flexible, wear-resistant pipe system provides a cost-effective way to connect structural components that move due to vibration and thermal expansion or as a result of intended movement.
Tex-Flex FEP corrugated tubing is capable of turning sharp corners with very small bend diameters without reducing the inside diameter of the tube. In fact, the bend diameter is almost four times smaller than a typical smoothbore tube of the same size.
The Signet 2552 metal magmeter is an insertion flow sensor that permits hot-tap access to the pipe stream, allowing quick and easy installation or maintenance without system shutdown.
The Ultra Mag wastewater flowmeter operates in treated water or sludge or slurries, requires minimal maintenance, and promises a long life of trouble-free service at a low life-cycle cost. Using non-invasive no-moving-parts flow sensing technology, it delivers accuracy of ±0.
FPR 300 Series impeller flowmeters come in 3/8 to 1 in. nominal pipe sizes and employ jewel bearings for very low minimum flows. Their 6 to 24 VDC pulse output is compatible with many types of controls.
The Universal Series of vane and piston variable area flowmeters boasts flow consistency, reliability, corrosion resistance, and low maintenance in chemical applications.
The FreeFlow differential pressure flowmeter is a compact unit constructed of PVC, polyetherimide, and polycarbonate materials. Its simple segmented wedge design boasts a low-cost, reliable, minimally invasive measurement technique.
The VeriCal in-situ calibration verification system for the GF90 air/gas flowmeter enables plant technicians to confirm flow measurement accuracy in minutes without removing the meter from the pipe or process.
MYNAH Technologies, Chesterfield, MO, has released MiMiC v3.0.0, the first third-generation simulation software solution for the dynamic modeling of process plant unit operations.
This wet-process colloid mill laboratory system for emulsifying, dispersion, and particle size reduction features a positive displacement feed pump to produce a pressure drop across the rotor-stator gap that yields smaller particle sizes with higher throughputs and greater uniformity.
The GWD 255 drum-top vacuum fits both 30 and 55 gallon drums, allowing users to recycle drums that are abundant in nearly every production plant.