Advertisement
Product Releases
Subscribe to Chem.info Product Releases

FEP Corrugated Tubing

May 5, 2008 6:28 am | Comments

Tex-Flex FEP corrugated tubing is capable of turning sharp corners with very small bend diameters without reducing the inside diameter of the tube. In fact, the bend diameter is almost four times smaller than a typical smoothbore tube of the same size.

Metal Magmeter

May 5, 2008 6:28 am | Comments

The Signet 2552 metal magmeter is an insertion flow sensor that permits hot-tap access to the pipe stream, allowing quick and easy installation or maintenance without system shutdown.

Self-Cleaning Wastewater Flowmeter

May 5, 2008 6:28 am | Comments

The Ultra Mag wastewater flowmeter operates in treated water or sludge or slurries, requires minimal maintenance, and promises a long life of trouble-free service at a low life-cycle cost. Using non-invasive no-moving-parts flow sensing technology, it delivers accuracy of ±0.

Advertisement

Low-Flow Liquid Flowmeters

May 5, 2008 6:28 am | Comments

FPR 300 Series impeller flowmeters come in 3/8 to 1 in. nominal pipe sizes and employ jewel bearings for very low minimum flows. Their 6 to 24 VDC pulse output is compatible with many types of controls.

Stainless Steel Variable Area Flowmeters

May 5, 2008 6:28 am | Comments

The Universal Series of vane and piston variable area flowmeters boasts flow consistency, reliability, corrosion resistance, and low maintenance in chemical applications.

Differential Pressure Flowmeter

May 5, 2008 6:28 am | Comments

The FreeFlow differential pressure flowmeter is a compact unit constructed of PVC, polyetherimide, and polycarbonate materials. Its simple segmented wedge design boasts a low-cost, reliable, minimally invasive measurement technique.

In-Situ Calibration Verification

May 5, 2008 6:28 am | Comments

The VeriCal in-situ calibration verification system for the GF90 air/gas flowmeter enables plant technicians to confirm flow measurement accuracy in minutes without removing the meter from the pipe or process.

3rd-Generation Simulation Software for Process Plants

May 5, 2008 6:28 am | Comments

MYNAH Technologies, Chesterfield, MO, has released MiMiC v3.0.0, the first third-generation simulation software solution for the dynamic modeling of process plant unit operations.

TOPICS:
Advertisement

Colloid Mill Laboratory System

May 5, 2008 6:28 am | Comments

This wet-process colloid mill laboratory system for emulsifying, dispersion, and particle size reduction features a positive displacement feed pump to produce a pressure drop across the rotor-stator gap that yields smaller particle sizes with higher throughputs and greater uniformity.

Drum-Top Vacuum

May 5, 2008 6:28 am | Comments

The GWD 255 drum-top vacuum fits both 30 and 55 gallon drums, allowing users to recycle drums that are abundant in nearly every production plant.

High Filtration/Containment Dust Collection Unit

May 5, 2008 6:28 am | Comments

The Absolut Cephir High Filtration/Containment System, equipped with a self-cleaning HEPA filter,

Loading-Rack Gangways

May 5, 2008 6:28 am | Comments

The G4 Gangway has been engineered to be stronger and lighter than traditional units, yet smoother to operate.

Thermoplastic Pressure Regulator

May 5, 2008 6:28 am | Comments

The Series PRHM thermoplastic pressure regulator converts inlet pressures of up to 150 psi to a predetermined maximum downstream pressure ranging from 5 to 125 psi settings.

High-Shear Processor

May 5, 2008 6:28 am | Comments

The M-110EH-30 laboratory model Microfluidizer high-shear processor comes standard with both a

Valve/Actuation Packs

May 5, 2008 6:28 am | Comments

More than 125 of Asahi/America's most popular valve and actuator combinations are available prepackaged as Fast Packs, which consist of Series 92 or 94 electric actuators or Series 79 pneumatic actuators mounted on Type 21 PVC ball valves or Type 57 PVC butterfly valves.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading