Advertisement
Product Releases
Advertisement

A New Way to Distribute Flow

Mon, 06/18/2012 - 12:09pm

PFD10-OD Proportional Flow DividerComatrol introduces the PFD10-OD Proportional Flow Divider, designed for compensated flow sharing between two motors or hydraulic circuits. According to the company, this circuit-saver solution is characterized by:

  • It takes the input flow and delivers precise flow management, providing engineers with a new tool for distributing flow on their applications.
  • It is an electro-proportional, compensated, normally open, flow dividing, pre-engineered HIC.
  • When there is no current applied to the coils, the inlet flow is divided equally between the work ports A and B, with flows up to 40 LPM (10.7 GPM). 
  • The flow ratio between the two ports will proportionally vary as current is provided to the coils (from 0 to 40 LPM out each work port). 
  • The valve’s internal pressure compensation of both work ports provide the precise, repeatable and load-independent flow control to both work ports/circuits.
  • The built-in pressure compensator provides repeatable flow sharing performance, regardless of the loads on the circuits or motors.
  • It is a pre-engineered HIC that can be ordered using its nomenclature to specify options needed for the application, like coil voltage and termination, port sizes and seals. 
  • The aluminum manifold design is optimized for a small space claim on the vehicle, with two mounting holes provided as standard.
  • The coils are designed for incorporation on machine control architecture that utilizes Sauer-Danfoss PLUS+1™ hardware. 
  • Adding PFD10-OD to your application using PLUS+1 GUIDE software is as easy as drag-and-drop.


www.comatrol.com

 

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading