Advertisement
Product Releases
Advertisement

Bag Dump Station with Bag Compactor

Thu, 10/20/2011 - 11:59am

VAC-U-MAX bag dumpAccording to VAC-U-MAX, its bag dump station for pneumatic conveying systems is not only equipped with an integral dust collector and a bag compactor, but it also boasts:

  • A sturdy, easily removable grate to provide a rigid surface for bag slitting and dumping, and ample open area for material to drop into the body.
  • Continuous pulsing of the dust collector to keep the work area clean.
  • An integral dust hood with a gas spring-assisted lift-up door, and a baffle (which is removable for cleaning) inside to direct air and dust downward and to the rear.
  • Dust collector bags that hook and snap in place, and are serviced from the clean side.
  • A door interlock switch to actuate the dust collector fan or low-pressure valve on the hood when the door is opened.
  • Body support via a strong frame made from square tubing.
  • Construction from 304 or 316 stainless steel or carbon steel.
  • A unitized body, meaning it is fabricated with the fewest possible welds.
  • No crevices for material to accumulate.
  • A minimum 1/8-inch radius on all interior bends, whereas the few corner welds are ground to not less than 1/8-inch radius.
  • The flexibility of the bag compactor to connect to the side of the bag dump station or to be used as a stand-alone item.
  • No glued-in gaskets, even on the large access door.
  • Availability of a magnetic grate to retain unwanted ferrous material.

info@vac-u-max.com

www.vac-u-max.com

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading