Advertisement
Liquid-Air-Gas Handling Equipment

Expulse Pulsation Dampener

February 12, 2015 9:49 am | by Flowrox | Product Releases | Comments

Pulsation is a common issue with several positive displacement pumps and can result to annoying noise and vibrations in the process pipeline. It can also potentially lead to breakages over time.

LISTED UNDER: Instrumentation & Controls | Liquid-Air-Gas Handling Equipment

Intelligent Metering Pump

February 3, 2015 1:50 pm | by SEEPEX Inc. | Product Releases | Comments

In an effort to continually improve on what is being offered, SEEPEX is proud to announce the programmable, precise and pulsation-free Intelligent Metering Pump (IMP). The new IMP design incorporates an Electronic Programming Module (EPM) memory chip on which parameters can b...

LISTED UNDER: PUMPS, chemical | PUMPS, metering | CHEMICAL FEED Systems

Purair 5 Ductless Fume Hoods

January 20, 2015 9:54 am | by Air Science USA | Product Releases | Comments

The new Purair 5 Ductless Fume Hoods feature a high level of operator protection where routine work is being carried out. The units exceed OSHA, ANSI and all relevant international standards. Typical applications for the Purair 5 include histology, powder weighing and sampling prep work.

LISTED UNDER: Instrumentation & Controls | Liquid-Air-Gas Handling Equipment
Advertisement

Victaulic Series 461 Stainless Steel Butterfly Valve

January 16, 2015 4:52 pm | by Victaulic | Product Releases | Comments

Victaulic has expanded its Vic®-300 MasterSeal™ butterfly valve line with a stainless steel option. A cost-competitive alternative to flanged valves, the new grooved-end Series 461 stainless steel butterfly valve enables faster, easier installation while offering a bubble-tight seal, improved flow and extended service life. The Series 461 valve features a patented seat design that seals equa...

LISTED UNDER: VALVES, butterfly | VALVES, stainless steel

Thermal Mass Air/Gas Flow Meter

January 2, 2015 9:53 am | by Fluid Components International | Product Releases | Comments

The advanced ST100 Series Thermal Mass Air/Gas Flow Meter from Fluid Components International (FCI) helps improve the accuracy of specialty gas point of use and sub-metering operations to achieve accurate billing in labs for better cost tracking and control.

LISTED UNDER: Instrumentation & Controls | Meters | Liquid-Air-Gas Handling Equipment

CIP System Reduces Water Consumption

December 29, 2014 10:19 am | by Telstar | Product Releases | Comments

Automated Clean-in-Place (CIP) system for lyophilizers reduces water consumption by up to 75 percent. The system takes full advantage of the movement of the shelf stack to clean the chamber walls, the instrument and service connection ports, the chamber-condenser isolation valve and the slot door by a sweep water jet effect.

LISTED UNDER: Liquid-Air-Gas Handling Equipment

Insertion Electromagnetic Flowmeter

December 17, 2014 4:37 pm | by Omega | Product Releases | Comments

FMG980 Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 25 to 305 mm (1 to 12") pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure and corrosive environments.

LISTED UNDER: Liquid-Air-Gas Handling Equipment

Solenoid Valve Connectors

December 11, 2014 9:25 am | by Mencom Corporation | Mencom Corporation | Product Releases | Comments

In engineering, the term solenoid refers to a variety of transducer devices that convert energy into linear motion. The term is also often used to refer to a solenoid valve, which is an integrated device containing an electromechanical solenoid which actuates either a pneumatic or hydraulic valve, or a solenoid switch. Connectors may either be purchased individually or as part of a molded cable...

LISTED UNDER: Instrumentation & Controls | VALVES, solenoid
Advertisement

HydroWhirl Poseidon Nozzles

December 9, 2014 4:48 pm | by BETE | Product Releases | Comments

BETE has expanded their line of HydroWhirl Poseidon nozzles to include lower flow rates from 4.45 GPM to 26.3 GPM. The smaller-sized tank washing nozzles are designed to fit through openings as small as 2”, while maintaining a slow and controlled rotation speed.

LISTED UNDER: Liquid-Air-Gas Handling Equipment | Tanks | TANKS, wash

Lightweight Polyethylene Tubing Offers Strength And Durability

November 14, 2014 11:39 am | Product Releases | Comments

Available now from NewAge Industries is Zelite polyethylene tubing in linear low density formulation (LLDPE). This formulation provides enhanced resistance to splitting because of its increased elasticity. Zelite is applicable for air lines, chemical and fluid transfer, wire jacketing, pneumatics and instrumentation.

LISTED UNDER: Liquid-Air-Gas Handling Equipment | Materials Handling / Storage / Packaging Equipment | Processing / Mixing / Blending Equipment

Explosion-Protected Crane Systems

November 11, 2014 1:02 pm | Product Releases | Comments

Crane systems manufactured by the J D Neuhaus company can be supplied with Atex classifications EX II 2 GD IIA T4 / EX II 3 GD IIB T4, with increased spark protection also available for explosion level II C.

LISTED UNDER: Liquid-Air-Gas Handling Equipment

The Supercritical Fluid Extractor Model SFT-110

October 30, 2014 10:37 am | by Supercritical Fluid Technologies | Product Releases | Comments

Supercritical Fluid Technologies (SFT) introduces a new bench top supercritical fluid extractor (SFE), the model SFT-110.

LISTED UNDER: Liquid-Air-Gas Handling Equipment

Low-Cost, Fast Coulometric KF Titrator

October 29, 2014 10:23 am | by JM Science | Product Releases | Comments

JM Science’s AQUACOUNTER Coulometric Karl Fischer Titrator (AQ-300) is an easy-to-use coulometric titrator that has six built-in calculation modes to accommodate solid, liquid and gas samples.

LISTED UNDER: Liquid-Air-Gas Handling Equipment

Hydropneumatic Tanks

October 23, 2014 2:39 pm | by Nikita Ernst, Associate Editor | Charles Ross & Son Company | Product Releases | Comments

Ross Hydropneumatic Tanks and Pressure Vessels are built in any capacity up to 100,000 gallons, with working pressures from 50 to 200 psig, for indoor or outdoor installation. 

LISTED UNDER: Liquid-Air-Gas Handling Equipment | Tanks

Pre-Engineered Tank For Ultra Pure Applications

October 23, 2014 2:35 pm | by Nikita Ernst, Associate Editor | Product Releases | Comments

Introducing a pre-engineered version of the TerraPure tank, molded from FDA-compliant linear polyethylene and available in 125 or 250 gallon capacities.

LISTED UNDER: Liquid-Air-Gas Handling Equipment | Tanks

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading