Advertisement

Improving the Axial Mixing Effect

January 7, 2013 7:16 am | Chem Info | Product Releases | Comments

Pfaudler has designed its TBX turbine with low-shearing capabilities and presents it as optimally suited for crystallization processes in the pharmaceutical industry.

LISTED UNDER: DUST MONITORS

Simplified Gas Monitoring in Remote Areas

January 4, 2013 7:01 am | Chem Info | Product Releases | Comments

The SM100 sampling pump module from General Monitors draws combustible or toxic gases at 0.05 to 1 LPM from monitored areas to a gas detector.

LISTED UNDER: DUST MONITORS

From Critical Reactor Systems to Routine Storage

January 3, 2013 6:43 am | Chem Info | Product Releases | Comments

Chemineer® 20 HT agitators are available in right-angle configurations to meet a broad range of specific application requirements.

LISTED UNDER: DUST MONITORS
Advertisement

Pre-Configured Enclosures with Uninterruptible Power Supplies

January 2, 2013 11:32 am | Chem Info | Product Releases | Comments

Falcon Electric Inc. offers its new ready-to-install NEMA 3R and 4 enclosures of any size with Falcon’s 1kVA to 3kVA SSG-RP Series™ and SSG ® Series 1.5kVA to 3kVA wide temperature UPSs.

LISTED UNDER: DUST MONITORS

3-A Sanitary Standard Certification

January 2, 2013 10:37 am | Chem Info | Product Releases | Comments

Powder Technologies has announced that the YSTRAL Conti-TDS has been certified by 3-A Sanitary Standards Inc.

LISTED UNDER: DUST MONITORS

Reconditioned Double Planetary Mixers

January 2, 2013 9:55 am | Chem Info | Product Releases | Comments

Charles Ross & Son has added seven reconditioned double planetary mixers to its inventory, all ready for immediate shipment and for either trial/rental or purchase.

LISTED UNDER: DUST MONITORS

Double C-Face Coupler Brakes

December 21, 2012 11:48 am | Chem Info | Product Releases | Comments

Force Control Industries Inc.’s double C-face coupler brake mounts on the drive end of a standard C-Face motor, replacing the commonly used motor brakes.

LISTED UNDER: DUST MONITORS

Vacuum Thermocouple Assemblies

December 20, 2012 9:26 am | Chem Info | Product Releases | Comments

Omega’s new TCV series of stainless steel thermocouple probe assemblies with M12 connectors is available in standard lengths of 3, 6, and 12 inches with a grounded or ungrounded thermocouple junction at the tip.

LISTED UNDER: CALIBRATION services
Advertisement

Calibrating your Process Pressure

December 14, 2012 10:20 am | Chem Info | Product Releases | Comments

E Instruments' P100 process pressure calibrator is suitable for pneumatic vacuum, and pressure and hydraulic pressure generation.

LISTED UNDER: CALIBRATION services

All-in-One Combustion Analyzer

November 29, 2012 11:50 am | Chem Info | Product Releases | Comments

E Instruments Intl.’s new, updated BTU1100-HE Portable Combustion Analyzer High-Efficiency Kit is the most updated, all-in-one kit for mechanical contractors, plumbers, boiler technicians and others that monitor and install condensing and high-efficiency systems.

LISTED UNDER: CALIBRATION services

Calibration Gas Generator

November 29, 2012 7:09 am | Chem Info | Product Releases | Comments

VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source.

LISTED UNDER: CALIBRATION services

Arsine in Olefins Calibration Standards

November 20, 2012 8:45 am | Chem Info | Product Releases | Comments

Kin-Tek Trace Source™ FPK Gas Permeation Tubes are used with FlexStream™ or Span Pac™ I Gas Standards Generators to dynamically generate ppb calibration standards of arsine in a matrix of nitrogen, air or polymerization grade ethylene or propylene.

LISTED UNDER: CALIBRATION services

Infrared Pyrometer Calibrator

November 16, 2012 11:16 am | Chem Info | Product Releases | Comments

E Instruments’ non-contact BBSL Black Body Calibrator offers a temperature range of 10?C above ambient to 350?C.

LISTED UNDER: CALIBRATION services

For High-Accuracy Measuring & Simulating

October 31, 2012 9:53 am | Chem Info | Product Releases | Comments

E Instruments Intl.’s new MC2100 is a portable, rugged and easy-to-use Multifunction Calibrator ideal for users’ calibration needs in the field and laboratory.

LISTED UNDER: CALIBRATION services

Easy-to-Use Loop Signal Calibrator

October 29, 2012 8:55 am | Chem Info | Product Releases | Comments

The JOFRA® CSC101 compact signal calibrator from AMETEK Test & Calibration Instruments packs numerous features into a rugged, handheld design that is both easy to use and highly accurate.

LISTED UNDER: CALIBRATION services

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading