The Best Ways to Skim and Save: A Guide to Oil Skimmers and Their Use
Waste oil doesn't have to be a burden to plant personnel. Using an oil skimmer ensures that oil will be removed with minimal effort. With the right equipment, a facility can manage the oil effectively while saving time and money. Here's how…By Jim Petrucci
Plant personnel are always looking for new tools and equipment to help them run their facility more efficiently. In many manufacturing and processing plants, oily water is present, which prevents a plant from functioning efficiently.
Water has several purposes in a manufacturing or processing facility. It can be used for cooling machinery, washing down equipment, or in processing. Sometimes, this water picks up oil or grease from surrounding machinery and equipment. Regardless of whether the facility chooses to reuse the water or send it to the city treatment plant, it has to remove the oil. Some plants, however, are not properly equipped to remove oil effectively.
An oil skimmer is the perfect solution. It is a piece of equipment that continuously removes oil from the surface of water. Oil skimmers are used in a wide variety of industries such as steel, biodiesel, manufacturing, food processing, wastewater treatment, and utility. However, not every facility utilizes an oil skimmer. Below is a guide to knowing why an oil skimmer is needed and how to properly choose the correct skimmer.
7 BenefitsThe obvious reason to use an oil skimmer is to remove oil from water. Aside from this, there are beneficial reasons for using an oil skimmer. Using an oil skimmer can save a plant both time and money.
1. Removed waste oil can be valuable to other industries that develop products with the waste oil. For example, industries with vegetable oils or animal fats, as a by-product, can provide this valuable oil to other industries to make products, such as biodiesel, soap, and animal feed. Waste petroleum oil can also be recycled and cleaned and then receive additives to help make new petroleum oil.
2. Some plants re-circulate their water after treatment, and some send it to a city treatment plant. Whichever is used, the removal of oil prior to treatment reduces costs and makes the treatment more efficient, often resulting in reduced surcharge.
3. Unlike time-consuming and costly manual skimming, an automatic oil skimmer continuously removes oil unattended.
4. The cost of an outside contractor to haul away oil is greatly reduced with the installation of an oil skimmer. Since an oil skimmer removes oil and not water, the facility is not charged for hauling away water. In addition, with the container collecting oil without water, it is possible that the oil has value, thus reversing the charge.
5. Using an oil skimmer prevents foul odors. When an oil layer forms on the water surface, it prevents oxygen from reaching the water, allowing anaerobic bacteria to grow. This bacteria causes the odor.
6. If oil is left to build up, it can potentially be a fire hazard. An oil skimmer helps reduce that threat by removing the oil.
7. Skimming can prevent clogs in lines and sprays by removing coolant's tramp oil. This tramp oil removal maximizes the effect and life of the coolant and also increases the life of the tool.
6 GuidelinesEvery oil skimmer is designed to do the same thing. However, not every oil skimmer will achieve the same results. There are certain features that an oil skimmer should have to operate at the maximum functional level.
1. An oil skimmer's removal capacity should match the amount of oil that is generated. For example, a small oil skimmer should not be used to remove oil from an oil spill.
2. The oil skimmer should be able to skim under conditions where floating debris is present.
3. The oil skimmer should not require constant adjustments or supervision in order to operate continuously. This is especially essential for a plant that is faced with minimal staffing.
4. Difficulty and expense of installation should be considered.
5. The oil skimmer should adjust to liquid level fluctuations.
6. The oil skimmer should be constructed of a material that is compatible with the application.
The Model 6V oil recovery system removes oily wastes that float on the surface of water.
1. One is a decanter, which is designed to return any water removed by the skimming process back to the skim tank. It is suggested to use a decanter in the following situations:
If the skimmed oil is frothy, as found in machine tool coolant, cold rolling mill coolant, or parts washing solution, the decanter gives the solution a chance to separate from the removed oil and be returned to the solution reservoir, which conserves on solution loss and new solution purchases.
When the oil does not enter the skimming area for long periods of time, the oil skimmer continually operates to protect against excessive discharge. During these times when there is no oil present, the decanter prevents an accumulation of water in the storage tank.
Where oily waste disposal costs and/or oil reclamation costs need to be controlled, the decanter minimizes the quantity of water or solution accumulation in waste storage containers, thereby controlling costs.
2. Other useful products are pre-fabricated mounting systems. They not only eliminate the need for expensive bridgework to install the skimmer but they also provide safe and easy access to the oil skimmer.
3. Used in conjunction with the oil skimmer, vapor hoods are chosen when oil must be removed from areas where volatile organic compounds (VOCs) are present. Vapor hoods are helpful in such places as tanks and sumps.
4. Oil skimmers are sometimes needed in extreme cold weather conditions. In order for the removed oil to be warm and fluid for processing, the oil skimmer needs to be equipped with a heating device such as a heat rod.
Jim Petrucci, an expert in oil skimming, has been with Oil Skimmers Inc. for 30 years. The company offers customized equipment and solutions for manufacturing and industrial applications that require dependable, continuous removal of oil from process liquids and wastewater. More information is available by contacting the company at 440-237-4600 or firstname.lastname@example.org.