Advertisement
Articles
Advertisement

Zero Tolerance: Coupler Makes Possible Safe Transfer of Butadiene

Mon, 10/01/2007 - 11:49am
The chemical known as 1,3-Butadiene, or CH(2)=CH-CH=CH(2), has many benefits. It is used in the manufacture of products such as tires, telephones, footwear, road surfaces, and carpet backings, to name a few. However, getting butadiene from Point A to Point B can be a difficult challenge. As a colorless, non-corrosive, flammable gas and liquid with a mild aromatic odor, butadiene is extremely flammable. In addition, according to OSHA, the permissible exposure for persons that are working with the chemical may not exceed one part butadiene per one million parts of air averaged over an eight-hour workday.

So, in essence, butadiene should not be touched or inhaled by anyone — the near equivalent of zero tolerance. That’s easier said than done when transporting this chemical in pressurized railcars that have been in service for several years and are equipped with connection devices that are outdated and difficult to use.

One of the largest manufacturers of butadiene, and other C4 chemical products, is Houston-based Texas Petrochemicals LP (TPC). The company has manufacturing facilities in the industrial corridor adjacent to the Houston Ship Channel, Baytown and Port Neches, TX, and Lake Charles, LA, respectively. TPC ships its butadiene via railcar and has been doing so successfully for quite some time. In fact, the company recently was honored with the 2006 Union Pacific Railroad Chemical Transportation Safety Pinnacle Award. TPC is one of only 30 winners with the distinction of having zero non-accident releases and implementing safe loading practices, out of 1,200 Union Pacific hazardous material shippers. TPC has won this award six times, indicating that safety is not just a catchphrase for this company. It’s a way of life.

Commitment to Safety

Butadiene should not be touched or inhaled by anyone — the near equivalent of zero tolerance.
A few years ago, TPC became concerned about the butadiene particulate remaining in the nipples and couplers on the standard valve systems that were in use at its facility and other facilities it regularly does business with throughout the supply chain.

“TPC has always been concerned about the environment, people around us, and our workers, so we have always tried to develop ways to prevent emissions,” said Gary Henneke, TPC’s manager of transportation. “The leftover particulate from the connections had us very concerned.”

The equipment that was in use at the time was meeting regulations set forth by the EPA, OSHA, and Texas Commission on Environmental Quality. However, the fact remained that TPC was not content to let its existing equipment perform under their expectations. In June 2005, Henneke began searching for the ideal dry disconnect coupler system for possible installation on all of TPC’s butadiene railcars. The company leases its railcars from major suppliers, such as Union Tank Car, ARL, and Trinity Industries, and has more than 3,000 in its fleet with roughly 600 units devoted to transporting butadiene. The capital outlay for an upgrade such as the one that Henneke and TPC were about to embark on was substantial. Therefore, without the ideal system, Henneke would not be as eager to spend the time and money involved on this upgrade.


Texas Petrochemicals LP workers do not have to use cheater bars, pipe wrenches, or hammers to connect the valves. They just turn a lever to connect.
During his search, Henneke met with Ray Lingo, regional representative for OPW Engineered Systems, Lebanon, OH. During this meeting, Henneke was introduced to the Drylok dry disconnect coupler and educated on its benefits. However, Henneke wanted more hands-on experience with the coupler before he made a decision.

“In October 2005, I went to OPW Engineered Systems’ headquarters in Lebanon and met with their engineers and Greg Carrino (director of sales and marketing) to see exactly how this product worked,” recalled Henneke. “I liked what I saw, and it was during that meeting that we also began our preliminary work to receive the proper approvals from the American Association of Railroads (AAR). Since the Drylok product was already approved by the AAR, it made it easier for us to seek out approvals for our specific application.”

Upon securing approvals from the AAR and TPC’s board of directors, and passing a capping test that was performed by Culture Industries, Henneke began the conversion process. He worked with Matt Tierney, Southwest regional manager, and David Garlington, vice president, of TransQuip USA Inc., a railcar equipment distributor and service provider, assisting in the actual equipment upgrades.

Benefits of Upgrading

One of the largest manufacturers of butadiene is Houston-based Texas Petrochemicals LP.
For the last 40 years, TPC employees had been loading or discharging its butadiene railcars with the use of several tools and a lot of sweat equity. To load a railcar, a worker would open the lid of the manway located on top of the railcar, remove a plug with the help of a 36-inch pipe wrench, pick up a two-and-half-foot steel nipple, and thread that nipple into that valve. Next, the worker would drag the hammer union fitting to the nipple, put it on the nipple, start it, and then take a hammer and beat the fitting on the valve. It’s a time-consuming process requiring the worker to bend over and use a lot of energy.

“Three valves on each railcar have to be done that way,” explained Henneke. “He is hammering with those hammers, he is using those pipe wrenches, busting those knuckles, and hurting those backs. Now with the new system, all the worker has to do is open the lid, pull the loading arm over the manway, set the Drylok female fitting over the male connection, and open the valve. That’s basically it. Hooking up a car goes from a half-an-hour to just seconds now. It’s like moving from the 19th century to the 21st century with this addition.”

By incorporating the Drylok couplers into its railcars, TPC has realized four major benefits:

1. Reduced Emissions

As the driest disconnect in the industry, the Drylok eliminates threaded connections that allow fugitive emissions. It also meets emission requirements set by EPA, OSHA, and TCEQ.

2. Time Savings

The average time for a TPC worker to connect the loading arm to the railcar valves was reduced from 35-40 minutes down to 35-40 seconds.

3. Ergonomic Benefits

No longer do TPC workers have to use cheater bars, pipe wrenches, or hammers to connect the valves. Now they just turn a lever to connect — no heavy lifting or bending over for long periods of time.

4. Increased Railcar Safety

In today’s world of possible terrorist threats, TPC was pleased to find that the Drylok product is tamper-resistant. This eliminates the possibility of sabotage, theft, and contamination. Only the manufactured mating piece allows access to the system.

Buy-in From Everyone

Getting butadiene, a colorless flammable gas and liquid, from Point A to Point B can be a difficult challenge.
The decision to upgrade its connections — including the choice of equipment — was the easy part for TPC during this entire process. The difficult part was convincing everyone — TPC workers, suppliers, and customers — that this upgrade was needed, would be beneficial, and would be the correct choice in the long run.

“I don’t care how good a product design is, if you put it up on that rack and say, ‘See ya,’ it’s not going to work. You have to put it on that rack, you have to build a relationship with that worker, that team leader, and show him exactly how it works. Then you have to give him your business card and say, ‘If you have a problem, you call me.’ You have to check up on him until he is very comfortable,” explained Henneke. “OPW Engineered Systems was focused on making sure every equipment upgrade is a smooth transition. That’s why this has been a success story. My hat goes off to everyone involved.”

In addition to its own employees, Henneke and the entire team of OPW Engineered Systems and TransQuip personally met with all of the company’s customers and suppliers to ensure that the upgrade was explained thoroughly and the proper training was in place for everyone involved.

“We’re still converting railcars and racks today. We’re working with Huntsman (Odessa), Nova Chemical, Chevron, Phillips, and several other customers right now,” said Henneke. “In fact, we have some of our comrades in the business that are calling us and asking us about this product.”

5 Easy Steps

1. Push the coupler onto the adaptor by first engaging the lower jaw of the coupler under the lip of the adaptor and then tilting the coupler upward to engage the top jaw.

2. Turn the handle counter-clockwise until the lock engages. The coupler and adaptor are locked together, but the valve is closed.

3. Press the button on the coupler down and turn the handle counter-clockwise until it locks. The valve is now open and the product will flow.

4. To disconnect, press the button on the coupler and rotate the handle clockwise until it locks. The valve is now closed.

5. Press the button on the coupler down and turn the handle clockwise to the "in-line" position. Press the tab on the opposite side of the coupler to release the upper jaw and move the coupler away.

He added: “We have the most technically advanced railcars in the country. Our railcars have safety features on them that no other cars have, and there are features inside that car we have built in that car because we carry hazardous material. We have safety valves that release faster than anywhere else in the nation. We have valves that are less fatiguing to our loaders. We have put in the fastest flow gauges in the industry.”

He continues to point out that through the efforts of many, especially OPW Engineered Systems, TPC now has the safest railcars in North America. “I would highly recommend the Drylok system to any carriers of butadiene and other hazardous liquids. Its value has been proven to me. I would attribute the successful integration of the Drylok system as a key component to the success of TPC receiving the 2006 Union Pacific Railroad Chemical Transportation Safety Pinnacle Award. Only the companies that are focused on safety and continually improve their operations are honored with the UP’s Pinnacle Award,” said Henneke.

Technical information for this article was provided by OPW Engineered Systems. More information on the Drylok system is available from the company by sending an e-mail to gcarrino@opw-es.com or calling 513-696-1500.

Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading