Energy-efficient CoolCube™ solenoid control module has been designed to allow the placement of an overdrive voltage on a solenoid valve, which can decrease valve response time, increase operating pressure and reduce power consumption. Compact, easy-to-install control module provides a step-down voltage to 1/3 of the input voltage. "Hit and hold" circuit accepts either a 12 or 24 VDC input to energize the solenoid valve with full power for 110 milliseconds. It then drops the voltage and current and reduces power consumption to 1/9 of the original value to hold the valve in its energized mode, reducing heat generation. Control module permits placing an overdrive voltage on a solenoid valve. This means a solenoid valve rated for 12 VDC can be energized with a voltage of 24 VDC. Since the module automatically drops the voltage after 110 milliseconds, the solenoid will not be impaired in any way.



Bio-Chem Valve Inc.
85 Fulton St.
Boonton, NJ, 07005