The AS-I Smartlink Profibus DP Gateway has a reduced housing depth of 57mm and therefore uses smaller enclosures. It is ready for operation upon connection to the AS-I system and provides diagnosis and operation status via an integrated LED display.
These nameplates incorporate up to three light-emitting diodes (LEDs) and output contacts into a standard three-hole footprint. They provide the means to easily monitor and display the status of multiple events and to trigger annunciation or device activation, with or without mechanical targets.
The Super Cycle option for this company’s lift tables is designed for approximately 200,000 cycles between maintenance. The option is available on standard lifts as well as wide-base units with capacities ranging from 2,000 lbs to 6,000 lbs.
The 1/8-in. Firerod cartridge heater features a helically wound resistance wire that produces higher watt densities and contributes to longer service life in space-restricted applications. The sheath is resistant to oxidation and corrosion, even at high temperatures.
T-GAGE non-contact temperature-based sensors detect objects that are either hotter or cooler than the ambient condition and then trigger an output. They are easy to set up with TEACH-mode push-button programming that requires no potentiometer adjustments.
The TrueCap Model MK-2e features simple calibration, high intensity LED’s to indicate the presence or absence of material, 0.5pf sensitivity and reliable product build-up immunity. The unit is robust and handles even the most difficult applications, including those up to 450°F.
Rolmar pot and churn brushes are available in lengths of 8½ in. and 20 in. for a variety of cleaning applications.
The LinelR heater series offers the ability to concentrate radiant heat to a long, narrow area for any application that requires a clean, responsive, non-contact heat source. The Model 5194 generates highly concentrated radiant energy along a thin line from 0.08-0.18 in. wide.
Workspace dimensions inside the No. 825 500°F electric walk-in oven measures 54 in. wide by 72 in. deep by 72 in. high. The oven features 30kW power installed in Incoloy sheathed tubular heating elements. A 6,000 CFM, 5HP recirculating blower provides horizontal airflow across the workload.
These electric ovens can be designed to fit a wide range of applications and specifications and are ideal for heating air in convection and forced air ducts, ovens and dryers. Most of these ovens are large enough for walk-in or pallet loaded material.
The Aquacounter® Coulometric Karl Fischer Titrator (AQ-300) has six built-in calculation modes to accommodate solid, liquid and gas samples. It includes a statistics package with one-touch calculations.
The 491M Gas Standards Generator is a modular, versatile system for blending precision gas standards in the lab. The unit is capable of generating concentration ranges from sub-ppb levels to over 50 percent, from pure compounds, using single step dilution.
Designed for use in Class I, Division 1, Group B, C and D hazardous areas, the Air Check EX Methyl Bromide Monitor responds to concentrations as low as five PPM in less than 30 seconds, yet is unaffected by humidity and other environmental conditions.
These metric set-screw collars come in 17 sizes from 4mm to 50mm and are offered in zinc plated steel and stainless steel. They complement a full line of one-piece, two-piece and hinged clamp-type shaft collars and one- and two-piece rigid couplings.