Subscribe to News
View Sample

Chem.Insider Daily

Volumetric Feeders

March 28, 2006 7:14 am | Comments

For volumetric feeding applications, the Tuf-Flex Series Feeders handle a wide variety of fine powders, flakes, granules, chips and pellets. Designed with a unique form of agitation, they are manufactured with a Tuf-Flex vinyl hopper that is agitated on the exterior by two alternating paddles.

Feeder/Conveying System

March 28, 2006 7:14 am | Comments

Self-contained feeder and conveying system is ideal for conveying powders pneumatically over short distances with high accuracy. Typical flow rates are between .015 and 1.25 cu ft/hour. A venturi eductor entrains the powder into the conveying air stream.

Turbine Agitator

March 28, 2006 7:08 am | Comments

The GT Turbine Agitator for agitator service in applications up to 600,000 gallons features an efficient, double reduction gear drive that delivers maximum mixing power with minimum energy consumption.


Drum Mixer Compounds Wide Range of Particles

March 28, 2006 6:12 am | Comments

The fill hopper to the left of the mixer is in the “up” position as the operator loads a new batch into the mixer. Modified paddle mixer solves a tricky problem By Charlie Divine In 1985, Mortex Manufacturing Co. Inc.

Bulk Bag Packaging Goes Nuclear

March 23, 2006 6:59 am | Comments

Fig. 1. Workers stand next to the Silo 3 packaging systems. On system #1 is a Lift-liner package inside a loading frame prepared to be loaded. New packaging options offer more transportation strategies By Kenneth M.

Cooling Tower Technology: Pros, Cons and pH Factors

March 20, 2006 10:17 am | Comments

With heat playing a major role in all chemical processing operations, it's hard to find a plant today that doesn't have a cooling tower or two on its roof or grounds.

What’s Protecting Your Pumps?

March 20, 2006 7:47 am | Comments

The service life of pumps and their bearings can be maximized if bearing options are evaluated based on their designs and operating environments.

Clariant Announces Expansions

March 20, 2006 6:48 am | Comments

Clariant's fine chemicals business has begun $12 million in plant expansions at four sites in the U.S. and Europe.


Energy Tops List of Worries

March 20, 2006 6:48 am | Comments

Most U.S. manufacturing industry CFOs surveyed by Bank of America (BoA) are confident of U.S. economic expansion this year but they fear energy costs will hurt manufacturing. BoA says its eighth annual survey of CFOs shows that they continue to view the current state of the U.S. economy in a positive light, giving it an average score of 66 on BoA's 100-point scale.

China to Drill Off U.S. Coast?

March 20, 2006 6:48 am | Comments

A top U.S. chemical industry official is warning that Chinese companies may soon drill for oil and gas 50 miles off the U.S. coast.

Floor and Bench Scales

March 20, 2006 6:42 am | Comments

The Combics series is a new generation of industrial floor and bench scales range from 10-lb low-capacity bases for precision parts counting to 10,000-lb 5 ft x 5 ft bulk floor scales. All bases and indicators are fully interchangeable using high-quality strain gage technology.

Flow Controller

March 14, 2006 5:07 am | Comments

The CIC-2005 flow controller is used for applications where the real time metering and control of chemicals dosed, injected, pumped or dispensed is of importance. Flow ranges of 0.

Flow Metering Challenges: Removing Air and Gas

March 13, 2006 1:40 pm | Comments

New digital Coriolis flow meters can be used for process measurement of substances as diverse as whipped butter, tomato paste, paint and even ground beef.

Fluid processor

March 13, 2006 10:43 am | Comments

Booth 2511 - Designed to operate at up to 30,000 psi process pressure, the M110EH-30 laboratory Microfluidizer processor, is beneficial to the production of nano-suspensions and nano-emulsions as well as cell disruption with the least number of passes.

Mass Flow Meter

March 13, 2006 10:43 am | Comments

Booth A2436 - The OPTIMASS Series 7000 and 3000 (formerly 7100) coriolis flowmeters are used for precise blending, dosing and batching applications and are designed specifically to handle low flow applications to high flow applications.


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.