The HazardWatch integrated fire and gas detection system is an intelligent safety monitoring solution designed to help process and plant engineers protect their operations, equipment and staff from fire and combustible gases while meeting demanding safety standards.
The OX 7104-CK oscilloscope 12-bit four-isolated-channel 600V Cat III displays up to eight traces on the screen. This all-in-one portable and rugged hand-held instrument features five complementary tools: an oscilloscope, FFT analyzer, TRMS multimeter, harmonic analyzer and a recorder.
Self-cleaning filters eliminate problems without downtime 'Heat exchangers, molds, pipes, tubing, sensors, monitors and other parts become fouled when dirt particles in the water settle out on warm surfaces.
These sanitary pressure gauges are engineered to meet stringent performance and material demands within dairy, food, chemical, biotechnology and pharmaceutical environments. They are designed and manufactured to meet 3A Standard Number 74-02. Features include: case sizes 2½ in. or 4 in.
PROGEF Natural Polypropylene Piping System is available in sizes from ½ in. to 4 in. and designed for use in applications where there is concern about the presence of small beads or crevices in the piping system.
This Dual-Shaft VersaMix incorporates a helical agitator and high-speed dispersion blade. This combination of agitators provides improved axial and radial turnover of the materials being mixed, as applying high shear to the product.
This Rapidoor closure has an inner diameter of 182 in. with a 36-in. straight skirt to fit on a 10-ft-long rubber vulcanizer. Operating on a horizontal side swing, left-hand hinge, it weighs approximately 33,000 lbs, but will open or close in less than 30 seconds.
The ALS 204 is an industrial-grade label applicator for continuous-duty applications in shipping, packaging, loading-dock, warehouse and distribution center environments.
Company offers the EasyClean 400 for fully automated pH sensor maintenance. Approved for use in hazardous classified areas, the system finds application throughout chemical, bio/pharmaceutical and food & beverage industries.
The Flat-Flex Shuttle Conveyor is designed to gap the product and turn its direction of travel through 90 degrees. It is ideal for the transferring of a product from a narrow size belt to a much wider belt or vice versa, depending on the specified stroke of the shuttle.
The GCX single mechanical cartridge seal is designed for ANSI and DIN pump services, where the pumps and seals are required to operate in multiple chemical environments without chemical compatibility change-outs.
EP37-3ELF low viscosity adhesive/sealant with high flexibility is a two-component optically clear epoxy system that features a forgiving one-to-one mix ratio by weight or volume.
The PTC-12 is a versatile product offering nine operating modes applied to two timed output relay contacts. When only one of the timers is being used, the other output acts as a set of instantaneous changeover contacts. The single model provides timing from 0.1 seconds to 100 hours.
The Maxum 30 shredder shreds blocks up to 2 ft x 2 ft x 6 ft of highly abrasive materials into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips, similar to those used on road shredding machines.
With its no moving part, thermal mass flow sensor and wetted materials available in either CPVC/Hastelloy C-22 or 316SS/Hastelloy C-22 combinations, the compact M180 Flow Switch is ideal for equipment flowing, dispensing or measuring corrosive fluids such as chlorine.