This Rapidoor closure has an inner diameter of 182 in. with a 36-in. straight skirt to fit on a 10-ft-long rubber vulcanizer. Operating on a horizontal side swing, left-hand hinge, it weighs approximately 33,000 lbs, but will open or close in less than 30 seconds.
The ALS 204 is an industrial-grade label applicator for continuous-duty applications in shipping, packaging, loading-dock, warehouse and distribution center environments.
Company offers the EasyClean 400 for fully automated pH sensor maintenance. Approved for use in hazardous classified areas, the system finds application throughout chemical, bio/pharmaceutical and food & beverage industries.
The Flat-Flex Shuttle Conveyor is designed to gap the product and turn its direction of travel through 90 degrees. It is ideal for the transferring of a product from a narrow size belt to a much wider belt or vice versa, depending on the specified stroke of the shuttle.
The GCX single mechanical cartridge seal is designed for ANSI and DIN pump services, where the pumps and seals are required to operate in multiple chemical environments without chemical compatibility change-outs.
EP37-3ELF low viscosity adhesive/sealant with high flexibility is a two-component optically clear epoxy system that features a forgiving one-to-one mix ratio by weight or volume.
The PTC-12 is a versatile product offering nine operating modes applied to two timed output relay contacts. When only one of the timers is being used, the other output acts as a set of instantaneous changeover contacts. The single model provides timing from 0.1 seconds to 100 hours.
The Maxum 30 shredder shreds blocks up to 2 ft x 2 ft x 6 ft of highly abrasive materials into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips, similar to those used on road shredding machines.
With its no moving part, thermal mass flow sensor and wetted materials available in either CPVC/Hastelloy C-22 or 316SS/Hastelloy C-22 combinations, the compact M180 Flow Switch is ideal for equipment flowing, dispensing or measuring corrosive fluids such as chlorine.
1. GE wants to feel good literally. GE-Advanced Materials, Silicones, in Wilton, CT, has
The V2 System Flow Meter features built-in flow conditioning for superior accuracy and requires minimum upstream/downstream straight-run piping when installed. The meter is designed as a new or retrofit flow meter solution in a wide range of clean water and wastewater treatment applications.
Based on a proven design concept, the XL800 tablet press offers double-sided output with up to 95 punch stations.
This unit offers patent pending features that maximize production efficiency. Type 304 stainless steel construction on all product contact surfaces ensures easy cleaning.
The Model 26C Vibratory Feeder is a rugged AC-operated unit, enables linear, exact feeding of large quantities of bulk materials.