Advertisement
The Source for Processing Industry News & Insight
Subscribe to Chem.info All
View Sample

SUBSCRIBE TO FREE
Chem.Insider Daily
EMAIL NEWSLETTER

Bulk Powder Cooling System

August 2, 2006 10:30 am | News | Comments

The high temperature model cools bulk solids with temperatures up to 1832-degrees F. For these very high temperatures, the system uses horizontal water-cooled tubes as the heat exchange surface. Bulk powder flows via gravity over the cooling tubes while indirectly cooled.

Straight Frame Conveyors

August 2, 2006 10:30 am | News | Comments

Straight Frame “Move-It” conveyors are suited for horizontal or incline conveying to grinders, totes, or to the next work station. They also serve for under-press applications, box transfer, and scrap removal. An optional built-in chute collects parts or scrap for transport.

Rotary Palletizer

August 2, 2006 10:30 am | News | Comments

With its servo-driven rotary turntable, the enhanced Pro-Pal palletizer is designed to achieve up to 20 percent greater output, loading product from three to eight production lines simultaneously onto three to eight pallets at speeds up to four layers per minute.

Advertisement

Practical Advice for Dealing With Heat Transfer Fluid

August 2, 2006 10:23 am | News | Comments

The service life of heat transfer fluid and related process efficiency can be increased by understanding how fluid breaks down and how to properly handle it.

The Sensor Is Not Always at Fault

August 2, 2006 10:15 am | News | Comments

The sensor gets blamed for many problems faced at process plants around the world.

One Year Later: A Story of Survival

August 2, 2006 10:09 am | News | Comments

Louisiana-based supplier to the chemical industry tells how his company triumphed over Katrina

Feeders in Milling and Micronization of Pharmaceutical Powders

August 2, 2006 10:03 am | News | Comments

Size reduction mills are used widely throughout the pharmaceutical industry for the reduction of active pharmaceutical ingredients (APIs) as well as bulk pharmaceuticals and excipients such as lactose and hydroxypropylmethyl cellulose.

Biofuels: Cutting Through the Hype

August 2, 2006 9:42 am | News | Comments

Some talk of a tipping point while others refer to a bubble about to burst. The biofuels business has, without doubt, acquired a life of its own. That is hardly surprising.

Advertisement

Can Railroads Avoid Pending Freight Crisis?

August 2, 2006 9:42 am | News | Comments

Major railroads told federal regulators they are racing to add staff, locomotives and hundreds of miles of new track to meet what regulators and chemical producers fear may be a rail capacity crisis later this year. Michael Ward, president and chief executive of CSX, told the U.S.

RFID to Play Major Role in Chemicals

August 2, 2006 9:42 am | News | Comments

The U.S. electronic product code standards entity, EPC Global U.S., has rolled out a spreadsheet software tool that will allow chemicals manufacturers to make dollars-and-cents evaluations of how RFID can improve their operations and bottom line.

Costly Lesson: Safety Is Never Simple

August 2, 2006 9:42 am | News | Comments

'The propylene piping involved in this incident protruded into an open space, yet it had no impact protection.' —Chemical Safety Board U.S.

Piloting Solenoid Valve

August 2, 2006 9:30 am | News | Comments

Miniature three-way high flow piloting solenoid valves are designed to offer space and weight savings as well as reliability. Available in a single coil configuration, the compact valve weighs just 4 ounces and uses only 7.8 watts at 28 vdc.

Oxygen Transmitter

August 2, 2006 9:30 am | News | Comments

The SPECTRACAP Oxygen Transmitter OMT355 is designed to monitor oxygen in industrial process gases. The unit can be flange-mounted directly into a process without sampling or sample conditioning equipment. This provides the user real time measurement data without sampling or sample switching delays.

Containment Enclosures

August 2, 2006 9:30 am | News | Comments

Containment enclosures are designed to control the weighing and safe dispensing or sampling of powders to meet COSSH and GPM requirements.

Positive Displacement Pumps

August 2, 2006 9:30 am | News | Comments

The FKL 15 and FKL 20 model positive displacement pumps feature a split-style gearbox for easier maintenance. Both are CIP-able with no performance loss. Additionally, their oil bath gearbox uses no bearing grease, reducing oil change-out to only every 4,000 hours.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading