Until recently, there was no other choice but to rely on I/P transmitters that were not agency approved for use in hazardous 'classified' natural gas applications. Fortunately, a few have become available for this type of service.
Launching a technology-based business in a market with a high barrier to entry isn't a challenge for the faint of heart. Here's a success story that shows how vendor partnering made all the difference…
Saving energy is an important issue from both an environmental and energy cost perspective. The key question is: How can a substantial and sustainable reduction of energy consumption be achieved? The most credible solution is to establish an understanding of how users consume their energy and make them responsible for it.
Are you searching for ways to take your productivity to higher ground? One good way is by getting all the uptime you can from the belt conveyors that carry materials, parts, and finished/packaged products throughout your plant.
The filling control technology employed in bottling machinery has evolved over the past decade, offering higher levels of accuracy and reproducibility while achieving extremely high reliability the latest generation of bottle filling controls exemplifies this trend by placing a small, intelligent device at each filling point to automatically control and monitor the filling process at that location.
The explosion-proof polymer makedown system is designed for preparation, activation and injection of liquid polymers in water and wastewater treatment applications. The system can produce dilute solution at capacities from 20 GPH to 3,000 GPH of total makedown solution.
Micro C-Series eccentric disc pumps are designed to lower ongoing maintenance costs in the transfer of fine chemicals due to their seal-less technology and gentle handling capabilities.
The TX33 with loop-powered RTD input is analog, non-isolated with a two-wire head-mount which converts the RTD into a proportional, linear and highly accurate output current. It features easy calibration and low temperature drift.
Fully integrated industrial-process control systems are designed and built in an in-house UL-listed panel shop. The systems are used in a wide variety of bulk-process-handling applications to streamline production operations. They are programmed for the user’s choice of automation platforms.
The Series 102 auxiliary switch is specifically designed for use in electrical utilities and offers unidirectional 90-degree indexing. It is available with up to 24 poles, making it ideal for a variety of power industry applications.
The LabPak viscometer is an easy-to-use mechanical device that utilizes a piston to measure time-of-fall up to 20 seconds, with accuracy to within 0.1 second. The unit is capable of measuring changes in viscosity as small as 0.
Custom molded bellows can be made from a range of materials such as LDPE, polypropylene, Hytrel, and thermoplastic elastomers to achieve certain properties with regard to chemical resistance or bio-compatibility.
The AccuGauge AG200 media-isolated, digital pressure gauge offers a 4–20 mA output signal complete with a large LCD display. The gauge can display each of the following measuring units with the push of a button: psi, bar, kg/cm, ATM, inches H20 and Hg.
Using the Material Master hydraulic bulk bag conditioning system, the operator loads bulk bags via forklift, then activates hydraulically actuated compression frames to break up materials, returning materials to a flowable state within minutes.