Advertisement
The Source for Processing Industry News & Insight
Subscribe to Chem.info All
View Sample

SUBSCRIBE TO FREE
Chem.Insider Daily
EMAIL NEWSLETTER

Large Vessel Electropolishing

August 6, 2007 12:26 pm | Product Releases | Comments

Electropolishing service totally immerses stainless steel parts in an electrolytic chemical bath and removes the surface high points with 0.0001 in. precision to produce a bright finish on all interior and exterior surfaces.

Ins and Outs of Pneumatic Conveying Receivers

August 1, 2007 10:38 am | Articles | Comments

When designing a continuous process complete with gravimetric loss-in-weight feeding, it's imperative that the refill device be engineered for feeder accuracy and process quality. Pneumatic conveying receivers can ensure dust-free, efficient transport and refill. Here's how…

Using I/P Transmitters in Natural Gas Applications

August 1, 2007 10:21 am | Articles | Comments

Until recently, there was no other choice but to rely on I/P transmitters that were not agency approved for use in hazardous 'classified' natural gas applications. Fortunately, a few have become available for this type of service.

Advertisement

Beating the Odds and Grinding Toward Success

August 1, 2007 10:08 am | Articles | Comments

Launching a technology-based business in a market with a high barrier to entry isn't a challenge for the faint of heart. Here's a success story that shows how vendor partnering made all the difference…

Plant Efficiency Ideas: Saving Energy

August 1, 2007 6:20 am | Articles | Comments

Saving energy is an important issue from both an environmental and energy cost perspective. The key question is: How can a substantial and sustainable reduction of energy consumption be achieved? The most credible solution is to establish an understanding of how users consume their energy and make them responsible for it.

TOPICS:

Plant Efficiency Ideas: Mechanical Fasteners in Conveyor Applications

August 1, 2007 6:09 am | Articles | Comments

Are you searching for ways to take your productivity to higher ground? One good way is by getting all the uptime you can from the belt conveyors that carry materials, parts, and finished/packaged products throughout your plant.

Plant Efficiency Ideas: Bottling Benefits

August 1, 2007 5:55 am | Articles | Comments

The filling control technology employed in bottling machinery has evolved over the past decade, offering higher levels of accuracy and reproducibility while achieving extremely high reliability the latest generation of bottle filling controls exemplifies this trend by placing a small, intelligent device at each filling point to automatically control and monitor the filling process at that location.

Temperature Transmitters

July 31, 2007 12:26 pm | Product Releases | Comments

The TX33 with loop-powered RTD input is analog, non-isolated with a two-wire head-mount which converts the RTD into a proportional, linear and highly accurate output current. It features easy calibration and low temperature drift.

TOPICS:
Advertisement

Eccentric Disc Pumps

July 31, 2007 12:26 pm | Product Releases | Comments

Micro C-Series eccentric disc pumps are designed to lower ongoing maintenance costs in the transfer of fine chemicals due to their seal-less technology and gentle handling capabilities.

Polymer Makedown System

July 31, 2007 12:26 pm | Product Releases | Comments

The explosion-proof polymer makedown system is designed for preparation, activation and injection of liquid polymers in water and wastewater treatment applications. The system can produce dilute solution at capacities from 20 GPH to 3,000 GPH of total makedown solution.

Auxiliary Switch

July 31, 2007 12:26 pm | Product Releases | Comments

The Series 102 auxiliary switch is specifically designed for use in electrical utilities and offers unidirectional 90-degree indexing. It is available with up to 24 poles, making it ideal for a variety of power industry applications.

Bench-Top Viscometer

July 31, 2007 12:26 pm | Product Releases | Comments

The LabPak viscometer is an easy-to-use mechanical device that utilizes a piston to measure time-of-fall up to 20 seconds, with accuracy to within 0.1 second. The unit is capable of measuring changes in viscosity as small as 0.

Blow Molded Bellows

July 31, 2007 12:26 pm | Product Releases | Comments

Custom molded bellows can be made from a range of materials such as LDPE, polypropylene, Hytrel, and thermoplastic elastomers to achieve certain properties with regard to chemical resistance or bio-compatibility.

Digital Pressure Gauge

July 31, 2007 12:26 pm | Product Releases | Comments

The AccuGauge AG200 media-isolated, digital pressure gauge offers a 4–20 mA output signal complete with a large LCD display. The gauge can display each of the following measuring units with the push of a button: psi, bar, kg/cm, ATM, inches H20 and Hg.

Process Control Systems

July 31, 2007 12:26 pm | Product Releases | Comments

Fully integrated industrial-process control systems are designed and built in an in-house UL-listed panel shop. The systems are used in a wide variety of bulk-process-handling applications to streamline production operations. They are programmed for the user’s choice of automation platforms.

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading