What qualities should a filtration system possess? The three keys to success at one wastewater treatment plant are simplicity of design, cleaning efficiency, and reliability due to few moving parts.
Continuous chemical reactors enable ultra-turbulent mixing of reactant streams continuously. Reactant mixtures are highly pressurized and subjected to high shear in microchannels. This report explores their potential.
Leading manufacturers offer tanks that can meet specific storage and handling needs. Some companies can even install your own unique components at the factory. Here is advice to consider before signing on the dotted line.
The loan of a 2-inch non-metallic pump changed everything. Despite being under a tremendous amount of abuse, the pump kept working without incident and dramatically increased productivity. Here's its story…
The rugged ColdSNAP is a self-contained temperature recorder that monitors shipments by recording a critical low temperature of refrigerated temperature-sensitive products in storage or transit.
A highly sensitive viscosity sensor that includes a reactor connection has been designed for end-point polymerization in pressurized or vacuum vessels.
The Model DP86 wet-wet differential pressure sensor is a double-sided stainless steel isolated piezoresistive silicon device.
The Bimetal dual-mode remote thermometer provides on-site indication of process temperature conditions and simultaneously provides a mV or ohm signal proportional to temperature for input to a transmitter, remote terminal unit, controller, recorder, indicator, PLC, DCS, or SCADA system.
Model 4600 ExplosionProof pressure sensors can withstand the high vibration and temperature extremes typically found in hydrogen applications.
HLR 750 Series AC-operated LVDTs have been approved for operation in Class 1, Division 2 and Class 1, Zone 2 hazardous locations.
Enhancements have been made to the Sandpiper S15 and S20 non-metallic pumps to improve corrosion resistance.
Harbin Electric Inc., a U.S. company with operations in Harbin, China, has developed a high-efficiency, energy-saving tower-type oil pump driven by permanent magnetic linear motors for the oil and gas industry.
The Model 3700 API-610 10th edition process pump is now offered in eight additional sizes, extending its hydraulic coverage to fit more requirements.
These compact multi-stage venturi vacuum pumps need only 45 psi air pressure but provide the same holding capacity as conventional pumps requiring 80 to 100 psi.