Cheminert Model M6 and M50 liquid handling pumps are for precision handling of liquids and/or gases, producing a bidirectional pulseless flow with a range of 10 nL/min to 10 mL/min for the M6 and 50µL/min to 50 mL/min for the M50.
The CPA Series of laboratory balances features automatic internal calibration via an integrated calibration weight at the touch of a key and will automatically recalibrate after a preprogrammed time interval or excessive temperature change
The Type 567 butterfly valve is available in sizes up to 12 in. and incorporates a double eccentric operating principle that allows the disc to disengage completely from the disc seal, even when partially open, reducing seal friction and improving seal wear
The Gladiator smart admittance level switch is designed to detect the level of liquid, slurry, or powder in a tank or vessel by measuring the capacitive admittance between a probe and the wall of the container.
The newest Cyclo product variant for the food industry and high-pressure washdown applications features enhanced C-face quill design; an FKM antimicrobial, multi-lipped, rotary output seal that acts as flinger to expel contaminants; corrosion-resistant stainless output shaft and hardware
Booth 1343 To be displayed at the show are pneumatic conveying and DeDusting solutions, a new
The new Tribo.d2 (Model 3400) is a two-wire, loop-powered emissions monitor for high- or low-temperature dust-monitoring applications. It's designed to
B-PAC MICS Series baghouse diagnostic controllers seamlessly integrate intelligent filter cleaning (IntelliPulse Technology), pressure control, particulate monitoring, auxiliary sensing (such as fan amps
Booth 2755 This laboratory-scale cGMP horizontal peeler centrifuge for processing small quantities of material maintains the advantages of automatic discharge and contained processing. The lab scale centrifuge is suitable for evaluating filtration and cake discharge characteristics.
New Identity Unveiled at Show Booth 2511 A new corporate name and brand identity will be unveiled by Bulkflow Technologies Ltd. at the Powder Show section of the Process Technology Expo International Exhibition (PTXi).
Booth 1000 A recent increase in capacity required an additional L-size Turbo-Dryer to heat-treat a fine (70 micron) metal oxide powder. This design can operate at temperatures up to 650°C to calcine or sinter metal powders.
Booth 1945 The K-S paddle dryer allows drying to moistures of 0.5 to 0.1 percent with a continuous process, providing uniform heating and residence time.
The Centri-Sifter model MO medium-capacity centrifugal screener features a cantilevered shaft with two externally mounted bearings between the screening chamber and motor drive, allowing all internals to slide freely from
Booth 2531 These custom-engineered shaft seals for rotating dry bulk process equipment provide an alternative to packed gland-type seals in clean-in-place systems. The shaft speed envelope now extends to 1,000 surface-feet-per minute on dry-running shafts.