Procap Series capacitance probes boast calibration stability, static discharge survival, and RF immunity. They use a simple timing technique that compares the discharge time of the probe capacitance to that of a reference capacitance.
Speedi-Sleeves offer a sealing solution when machine shaft surfaces have been damaged or worn in operation. Made from stainless steel for corrosion resistance, these wear sleeves eliminate the typical need to replace or rework shafts whose surfaces have been compromised by abrasion due to environmental contaminants, high pressures, speeds, or inadequate lubrication.
These rectangular secondary containment basins, available in capacities from 40 to 3,500 gallons, meet or exceed EPA requirements for containment of hazardous chemicals. They are molded of high-density crosslink or FDA-compliant linear polyethylene, and their tapered design permits nesting during shipping.
Spirapro TFC SR3 and TFC reverse osmosis (RO) spiral elements can be used for pharmaceutical and fine chemical applications. They are engineered to lower operating costs significantly for a wide variety of applications including selective rejection, desalting, and organics concentration.
MicroWhirl misting nozzles eliminate the dripping problems and fragility of impingement nozzles and offer improved durability in a wide range of applications including turbine cooling, odor and dust control, humidification, scrubbing, and coating.
These conical dryer/mixers have been designed for various processing tasks required in chemical manufacturing and have been engineered for precision. Typical duties are drying under vacuum, mixing-blending, solvent recovery, and liquid or gas injection.
The SYGEF PVDF exhaust piping system has been designed to provide a non-corroding, safe system for the conveyance of aggressive exhaust gases and fumes. It conforms to FM 4910 (Cleanroom Materials Flammability Test Protocol) standards and has been tested per standard ULC S102.2 with a documented flame spread value of 0 and smoke spread value of 50.
A new 3-in-1 system combines a Vibroscreen vibratory screener, a batch hopper, and an integral feed control device that regulates the flow of material into the screener. The system is intended for applications that require screening in batches.
The ST75V air/gas flowmeter can be used by engineers and technicians seeking a highly accurate mass flow measurement solution for hydrogen, natural gas, and other gases in small line processes and for skid-mounted equipment assemblies.
Cabinet Oven No. 927 is an electrically heated, 750°F unit modified with internal air filtration, currently used for curing Teflon. Features include 64 kW installed in Incoloy sheathed tubular heating elements and a 3,300 CFM, 2-HP recirculating blower that provides horizontal airflow to the load.
A "boxed solution" to airborne mist removal reduces pressure drop and energy use, delivers 10-year filter life, and promises 99.5 percent and greater capture efficiency. This long-life centralized CECO Mist Collector (CMC) system cuts operating costs and maintenance for mist elimination and allows effluent from multiple operations, even plant-wide, to be treated at one location. In turn, captured liquids and particulates can be collected for disposal or reprocessing.
Absolute HEPA and ULPA filters have poured-in-place gaskets to ensure leak-free performance. The sealing method is uniform in depth and encompasses the entire filter sealing surface, eliminating gasket junctures, blemishes, and other corner leaks that occur with conventional high-efficiency filters.
The Model 50 duplex basket strainer has been engineered to protect piping system components, such as meters, pumps, and instrumentation, from damage and to help prevent expensive unscheduled downtime. It runs continuously to remove possible damage-causing particulate matter from the system flow, taking away unwanted matter through the use of two strainer baskets operating independently within a single housing.
Mobility Series Fourier Transform Infrared (FT-IR) spectrometers have been built to move FT-IR spectroscopy out of the conventional analytical laboratory and closer to the source of the sample. There are three systems: the MLp, the ML, and the MLx.
This DP7000 temperature meter offers a wide temperature range, two selectable alarm settings, and an internal buzzer that indicates alarm condition or error. The user can define setpoint, on/off heating and cooling regulation, alarm configuration, load status, and ambient probe adjustment.